Search eceee proceedings

Energy savings through direct secondary reuse: an exemplary analysis of the German automotive sector

Panel: 2. Sustainable production design and supply chain initiatives

This is a peer-reviewed paper.

Authors:
Russell McKenna, Chair of Energy Economics KIT-IIP, Germany
Alois Kessler, EnBW, Germany
Sören Reith, EnBW, Germany
Wolf Fichtner, Chair for Energy Economics, IIP, KIT, Germany

Abstract

Energy productivity can be increased by the re-use and recycling of materials and products. Direct secondary use is defined as “the reuse of a good at the end of its use phase without the destruction of the existing product design”, and is divided into direct reuse and remanufacturing (Figure 1). The possible energy savings through direct secondary use have hardly been examined until now. Hence, this article quantifies the theoretical energy savings on the basis of an exemplary analysis of the German automotive industry. After an overview of the motivation for and barriers to direct secondary use, product-related lifecycle assessments (LCAs) for the automotive industry are reviewed. On this basis, energy balances are developed through the determination of the specific energy consumption (SEC) during production of individual products within this industrial sub-sector, which are representative of their product group (Table 1). In a second step it is determined, which part of the energy consumption during production can be substituted by products from direct secondary use. The sector-specific results are correlated with the primary energy consumption in Germany, from which the technical primary energy savings through direct secondary use can be calculated. In conclusion, relevant influencing factors are subjected to a sensitivity analysis. Figure 4 shows the energetic effect of direct secondary use in the German automotive industry. For SB1, the sum of theoretical energy savings is 3.4 PJ, whereas considering SB2, 6.1 PJ could be saved. This article will therefore give a first quantification of the possible energy savings through direct secondary use and will identify further interesting fields of research.

Downloads

Download this presentation as pdf: 2-107-12_McKenna_pre.pdf

Download this paper as pdf: 2-107-12_McKenna.pdf