Search eceee proceedings
Economic and environmental impacts of energy efficient industrial boilers
Panel: 4. Undertaking high impact actions: The role of technology and systems optimisation
This is a peer-reviewed paper.
Author:
Ken Tiedemann, BC Hydro, Canada
Abstract
In many Canadain industrial establishments, the boiler is the single largest fuel user, with oil and natural gas the predominant fuels. Thermal efficiencies can reach 85% or higher with additional efficiencies produced by non-condensing heat recovery systems, condensing heat recovery systems and regenerative burners. About one-quarter of the energy savings and emissions reductions in the federal Industrial Dollars to Sense program have been due to increased boiler efficiency. The purpose of this study is to evaluate the impact of the Dollars to Sense program on boiler efficiency, boiler energy consumption and related greenhouse gas emissions.
Data and Method. The analysis was based on a combination of discrete choice econometric modelling and engineering algorithms. The first step was the development of detailed end use consumption estimates for water heating and other end uses. The second step was the development of energy savings ratios for energy efficient technologies. The third step was to estimate the impact of the program on the installation of mid-efficiency and high-efficient boilers. The fourth step was the estimation of energy and greenhouse gas emissions.
Results. (1) Water and process heat make up about 10,900 GJ per establishment or about eleven percent of the energy used in small and medium-sized industrial establishments in Canada. (2) Typical efficiency levels of currently installed industrial boilers are about 75% for standard-efficiency boilers, 85% for mid-efficiency boilers and 90% for condensing boilers. (3) Over a five-year period, the Dollars to Sense program increased penetration of mid-efficiency boilers by 12.5% and penetration of high efficiency boilers by 4.0%. (4) The Dollars to Sense program resulted in reduced consumption of 610 TJ of oil and natural gas per year and reduced emission of 34.7 kilotonnes of CO2E per year for industrial boilers.
Downloads
Download this paper as pdf: 4-159-12_Tiedemann.pdf
Panels of
1. Programmes to promote industrial energy efficiency
2. Sustainable production design and supply chain initiatives
3. Matching policies and drivers: Policies and Directives to drive industrial efficiency
4. Undertaking high impact actions: The role of technology and systems optimisation
5. The role of energy management systems, education, outreach and training
6. The role of financing to improve industrial efficiency, global perspective

























