Search eceee proceedings

Optimal design of thermal storage and refrigeration units: a source for energy efficiency improvement?

Panel: 4. Undertaking high impact actions: The role of technology and systems optimisation

This is a peer-reviewed paper.

Authors:
Stephanie Jumel, EDF R&D, France
, EDF R&D, France
JUMEL Stéphanie, EDF R&D, France

Abstract

Energy needs are constantly increasing in Europe, particularly in refrigeration applications. Moreover, the current and future tensions on electricity markets require significant investment from the power producers and transmission operators, which is difficult in periods of economic crisis.

It is possible to limit these investments by peak shaving and demand response by shifting consumption from peak hours to off-peak hours. In France the annual electricity consumption, due to cold production in industrial and commercial sectors, amounts to 20 TWh. The case of refrigeration is interesting as it is a “storable” use of energy. Different means of storage are available or under development, namely iced water, ice and ice slurry. Cold storage is sometimes regarded as a source of inefficiency, as it may generate energy losses through poor heat exchangers and wall leakage.

EDF believes that thermal storage, coupled with a sound and smart automation, represents on the contrary a source of energy efficiency.

Energy savings can be obtained by an optimized and intelligent control. In the industry, the variation of production flows leads to large variations on cold production. The addition of a cooling storage facility to produce cold requires predictive and optimized management to get an energy optimized.

EDF R&D is developing a modeling software tool to calculate the energy saving and financial interest of cold storage units.

This software is based on physical modeling of facilities and distribution network as well as optimization algorithms. It can be used to optimize the facilities size and operation strategy satisfying a given daily cooling capacity curve, with respect to the objective of savings. In parallel a demonstration based both on laboratory and real installations is underway.

Places where a cold storage is relevant are essentially commercial and industrial sites, clean rooms, data centers, plastics processing, cold storage rooms, central kitchens, dairies.

Downloads

Download this paper as pdf: 4-027-12_Jumel.pdf