Search eceee proceedings

Environmental impact of high temperature industrial heat pumps – from a global warming potential (GWP) perspective

Panel: 4. Technology, products and systems

This is a peer-reviewed paper.

Authors:
Tor-Martin Tveit, Olvondo Technology AS, Norway
Ron Zevenhoven, Åbo Akademi University, Finland
Umara Khan, Åbo Akademi University, Finland

Abstract

Several factors drive the increased utilisation of heat pumps in industry. Two important factors are the drive to reduce the negative environmental impact of industrial processes and the general trend of electrification (“de-fuelling”) of energy systems. Much of the heat demand in the process industry is at temperature levels above 100 ÅãC, which is above the temperature achievable with conventional heat pumps. Heat pump manufacturers are developing new heat pump technologies that can meet the demand of high sink temperatures and high temperature lifts. These heat pumps are often referred to as High Temperature Heat Pumps (HTHP) or Very High Temperature Heat pumps (VHTHP). The new heat pump technologies operate under conditions different from conventional heat pumps used for domestic heating, and it is not obvious how to evaluate the environmental impact of the installations.

It depends very much on the technology being replaced what the various efficiencies of the heat pump system are (e.g. Coefficient of Performance (COP), system efficiency or exergy efficiency), and what the emissions are from generating the electricity used to drive the heat pump.

In this paper we are investigating ways of evaluating the conditions where a heat pump installation will be an improvement and under which conditions it will not, where the focus will be on reducing global warming. We will look at basic thermodynamic considerations and modern thermodynamics tools, e.g. exergy and pinch analysis using data from the European energy systems as practical examples. To give a fuller picture of the impact, a life cycle impact assessment (LCA) is given, comparing a Stirling engine- type VHTHP with more conventional heaters. The paper is also using a current VHTHP installation as an example throughout the paper.

Watch presentation

Downloads

Download this presentation as pdf: 4-001-20_Tveit_pre.pdf

Download this paper as pdf: 4-001-20_Tveit.pdf