Search eceee proceedings
Calculating the investment needs in European industry for the 2030 energy efficiency targets
Panel: 1. Processes and technologies to meet future challenges
This is a non-peer reviewed extended abstract. No paper available.
Author:
Iolanda Saviuc, The Joint Research Centre of the European Commission, Italy
Paolo Bertoldi, European Commission, Joint Research Centre (JRC) Ispra, Italy
Gbemi Oluleye
Abstract
In 2020, industry in EU27 consumed 17.2% of the total energy flow, namely 230,923 kTOE. Seeing as the recast Energy Efficiency Directive from 2023 mandates a reduction in energy consumption by 11.7% until 2030, energy efficiency measures have become relevant in view of the “energy efficiency first” principle. In order to reach the target, investment in energy efficiency measures and equipment is needed. This study proposes a method to estimate a benchmark value for the required investment in the European Union.
A mathematical optimisation model is proposed to minimize the investment cost associated with energy efficiency measures and technologies. The model is based on the level of energy savings and on the payback period of each individual solution or technology that can deliver energy savings. The level of energy savings is valorised based on the price of energy.
A literature review identified the technologies, their technical potential for annual energy savings, and their payback time for the six most energy-intensive sectors of EU industry.
The six industry sectors are responsible for 64% of the total industrial energy consumption: Iron & Steel, Pulp & Paper, Chemical, Non-Ferrous Metal, Non-Metallic Minerals, and Petroleum refineries. For each of these six sectors, the literature review identified the mix of solutions (named “energy saving opportunity” – e.g., sub-metering, flue gas monitoring, etc.), as well as their technical potential for energy savings (i.e., the number of kTOE potentially saved per year), and payback period.
With these data points, the optimization model is designed to find the most cost-effective combination of technologies that would achieve the targeted energy savings within the 2030 time horizon.
The method was applied for two separate simulations: one in which all six sectors would reduce their consumption equally by 11.7%, and another one in which each sector would contribute with different percentages towards an average of approximately 11.7%, based on the PRIMES database. In both cases, the reference price of energy was a weighted average between the price of natural gas and that of electricity. The simulations were run in MS Excel using the WhatsBest extension.
The results of this application indicate that 35 Bn Euros investment are needed to achieve 11.7% reduction in energy consumption by 2030 in the six most energy-intensive sectors of the EU27 industry, if all sectors reduce their consumption equally. In the alternative scenario, approx. 43 Bn Euros are required. The higher value is mainly due to reduction requirements in the Chemical sector that in the PRIMES model are significantly higher than the 11.7% average, and it demonstrates the flexibility of the method.
The novel method makes use of the best available data and provides reference figures both to policy makers and to industry. It is also customizable for different simulations in the future, thus providing benchmark figures for the discussion on energy efficiency in the European industry.
Downloads
Download this presentation as pdf: 1-045-23_Saviuc_Pres.pdf

























