Search eceee proceedings

Green hydrogen application in the energy-intensive industry: a feasibility study

Panel: 1. Processes and technologies to meet future challenges

This is a non-peer reviewed extended abstract. No paper available.

Author:
Marco Pellegrini, Department of Industrial Engineering - University of Bologna, Italy Alessandro Guzzini, Department of Industrial Engineering - University of Bologna, Italy Cesare Saccani, Department of Industrial Engineering - University of Bologna, Italy

Abstract

Energy-intensive industries, which include pulp and paper, ceramics and refractory, chemicals, fertilisers, refining, iron and steel, nonferrous metals (primarily aluminium), and nonmetallic minerals (mainly cement), play an essential role in the energy sector. In Europe, they account for around one-quarter of the primary energy. They are responsible for a non-eligible percentage of greenhouse gas (GHG) emissions since most energy employed within these industrial processes mainly comes from fossil fuels such as coal, oil, and natural gas.

Green hydrogen (i.e., hydrogen produced by water electrolysis fed by renewable energy sources) is expected to contribute to the decarbonisation of energy-intensive industries to reach the EU goals of GHGs emission reduction by at least 55% in 2030 and by reaching the net-zero emissions by 2050. Despite the significant investments the European Union and the Member States foreseen through different financial channels, there is still uncertainty on when and how green hydrogen will become a sustainable piece of the decarbonisation pathway. While the potential for a vast CO2 emission reduction is high in the energy-intensive industry, several barriers (including regulatory ones for the implementation, low fossil-fuel prices, adaptation to the industry processes, increased investment cost, and lack of knowledge and trust) hinder a wider adoption of green hydrogen. The first step for the market uptake of green hydrogen in the energy-intensive industry is the preliminary techno-economic evaluation of integrating a green hydrogen generation, storage, transport and end-use plant in existing facilities.

The study aims to investigate the techno-economic sustainability of integrating a photovoltaic (PV) plant coupled with electrolyser units in a chemical industry located in Italy. The techno-economic assessment is performed through the Optiplant tool by comparing different plant configurations (i.e. alkaline or proton-exchange membrane (PEM) electrolyser, hydrogen storage and battery storage, in site power generation from renewable sources, co-generation from sulphuric acid production plant or green power purchasing by the grid). The preliminary analysis considers one single burner of a specific chemical production process as a reference case study for future up-scaling. Furthermore, it investigates different burning configurations, including hydrogen blending at various percentages, aiming to guarantee industrial process efficiency while reducing environmental impacts.

Downloads

Download this presentation as pdf: 1-001-23_Pellegrini_Pres.pdf