Search eceee proceedings
Paris-compatibility of cement decarbonisation roadmaps on the global level and of major emitter countries
Panel: 1. Processes and technologies to meet future challenges
This is a non-peer reviewed extended abstract. No paper available.
Author:
Georg Holtz, Wuppertal Institut, Germany
Robin König, German Aerospace Center, Germany
Abstract
Cement is responsible for about 7% of global CO2 emissions from the energy and industry sectors, according to the IPCC. Almost all of the direct emissions related to the sector are generated through the production of cement clinker and about 2/3 of these emissions result from the chemical reaction by which cement clinker is produced from limestone. Broadly speaking, key strategies for reducing CO2-emissions of the cement sector are: 1) reducing the amount of clinker required to achieve the same performance of concrete structures, 2) reducing CO2 generation during clinker production through thermal efficiency, fuel switch and use of decarbonated raw materials, 3) capture and storage of CO2 generated during clinker production.
Several cement industry associations have developed roadmaps for CO2 reduction for the global cement industry or for specific world regions. The work conducted assessed whether current decarbonisation ambitions of the cement industry on the global level and in major emitter countries (China, EU, India, USA) are in line with the goals of the Paris Agreement. For the elicitation of the current ambition of the cement industry a quantitative analysis of existing roadmaps with regards to their cumulative CO2 emissions in the time period 2020 to 2050 was conducted.
For the global level, cumulative emissions from the roadmap of the Global Cement and Concrete Association (GCCA) were compared to a Paris compatible global CO2 budget for the cement sector, which was derived based on a comparison of results of Paris-compatible pathways from Integrated Assessment Models with a sectoral grandfathering approach towards the remaining global CO2 budget for anthropogenic emissions. It is concluded that staying below cumulative emissions of (about) 50 Gt CO2 is an ambitious and Paris-compatible CO2 reduction target for the global cement industry and that the GCCA roadmap is in line with this target.
A regional break-down of this Paris-compatible CO2 budget for the global cement industry was conducted by three different allocation methods (“Grandfathering”, “Immediate per capita convergence”, “Equal cumulative per capita emissions”). The regional allocations of budgets differ largely, depending on the allocation method. In all cases, there are allocation methods according to which each of the analyzed national roadmaps is or is not compatible to the Paris Agreement.
In a second step, levers for acceleration of cement decarbonisation in the major emitter countries were identified through a comparative analysis between the mitigation levers used in their respective roadmaps. Based on this comparison, pathways with increased ambition were derived. For the quantification a model was developed and used which provides a unified analytical structure to represent and compare the different national mitigation pathways. The cumulative emissions of the increased ambition pathways are 8% to 29% lower than those of the current ambition pathways but the assessment of their Paris-compatibility does not change substantially.
Finally, mitigation levers were analysed with regards to their contributions to CO2 mitigation in the increased ambition pathways. CCS contributes the most (39-55%) to mitigation across all cases. Mitigation levers on the concrete level that reduce cement demand sum up to about 20-25% of all contributions and thus – if combined – rank second most important. Furthermore, the reduction of cement demand facilitates a faster up-scaling of other mitigation levers at the cement and clinker levels that make use of limited inputs such as supplementary cementitious materials and waste-based fuels. Material efficiency therefore facilitates a stronger-than-linear CO2 reduction which suggests that it should be a main policy goal, besides facilitating CCS.
Downloads
Download this presentation as pdf: 1-024-23_Holtz_Pres.pdf

























