Search eceee proceedings

Green hydrogen for hard metals recycling

Panel: 1. Processes & technologies for challenges of the future

This is a non-peer reviewed extended abstract. No paper available.

Author:
Anna Realini, OMCD GROUP, Italy Gian Pietro De Gaudenzi, OMCD TEK HUB, Italy Mattia Garabelli, OMCD TEK HUB, Italy Gian Maria Passoni, OMCD GROUP, Italy

Abstract

Hard Metals are a class of composite materials where a carbide-base skeleton, mainly WC (tungsten carbide), is embedded in a metallic binder, usually Cobalt-based, being Ni (Nickel) a viable alternative for special applications.

The special characteristics of WC alloys (hardness and wear resistance) allow them to be used in a wide range of sectors where previously inferior materials were used, allowing users to better manage industrial processes and increase production performance. They are also considered a strategic material at the base of industrial economy and wellness society: economic policies factors and the EU classification of W (tungsten) and Co (cobalt) among the Critical Raw Materials, have highlighted the relevance to develop and/or optimize recovering processes of the raw material values along the whole hardmetal life cycle.

Moreover, mining and subsequent transformation of W and Co to obtain WC and Co powders has a very high environmental impact, both in terms of energy consumption and pollution.

To solve this issue, several recycling routes have been explored in hard metals industry. One of the most promising is the oxidation/reduction/carburization (OXR) thermal treatment. This however shows a high consumption of both energy and (grey) hydrogen.

In order to reduce the carbon footprint of the OXR process, several actions can be put in place: a way to minimize the environmental impact is to self-produce green hydrogen and energy through renewable plants.

The aim of this paper is to quantify the energy saving potential, techno-economic challenges and environmental impact of hard metal OXR recycling, both with and without green hydrogen, also from a circular economy standpoint, compared with literature data that consider the impact of hard metal production from metallic ores. This is also integrated with a quality assurance analysis that considers not only the process, but also the metallurgical properties of the recycled material.

The main conclusion of the study is related to the potential CO2eq savings with regards to the current processes: the overall CO2 intensity of the process is dropped by 90% with regards to the "best case scenario" of powder production from virgin raw materials, while, compared to the current recycling route, the inclusion of PV energy and green hydrogen allows to reduce the specific CO2 emissions by two thirds.

The overall impact of the process, together with the quality of final product, is further improved by refining the recycling routes of hard metals in two specific EU-funded projects: ResQTool and MESCEL. Some results of the latest are also presented.

Downloads

Download this presentation as pdf: 1-043-25_Realini_Pres.pdf