Search eceee proceedings
Reducing Energy Consumption in the Medicinal Plant Drying Process Through Stepwise Drying by Changing the Air Volume Flow Rate and Temperature
Panel: 1. Processes & technologies for challenges of the future
This is a non-peer reviewed extended abstract. No paper available.
Author:
Theresia Puteri, Institut NOWUM-Energy der FH Aachen, Germany
Liane Kahlert, INRES/ Universität Bonn, Germany
Dr. Katharina Luhmer, INRES/ Universität Bonn, Germany
Prof. Dr.-Ing. Günter Valder, FH Aachen University of Applied Science, Germany
Abstract
The use of plants for medicinal purposes is steadily increasing, leading to a growing demand for more efficient and sustainable drying methods. Conventional drying processes typically span 4–5 days, depending on the plant species, drying temperature and ambient conditions.
This study aims to reduce energy consumption by applying a stepwise drying process in which air volume flow rate and temperature are adjusted during the drying cycle. Experimental data are collected by connecting power meters to the main components of a cabinet dryer: the ventilator, heater, and heat exchanger. Pepper Mint (Mentha x piperita 'Multimentha') is used to investigate the effect of varying temperature and volume flow rate. The specific air volume flow rate was set to 2,125 m3/h per cubic meter of drying chamber volume and systematically varied by ±20%, while the operating temperature was maintained between 50 and 70 °C. Results show that stepping up the temperature and the volume flow rate can shorten the drying time and reduce energy use. Compared to constant parameter methods, stepwise drying significantly reduces total energy use and shortens the drying process.
These findings highlight the potential for dynamic process control in medicinal plant drying, offering practical benefits for producers aiming to reduce operational costs.
Downloads
Download this presentation as pdf: 1-008-25_Puteri_Pres.pdf

























