Search eceee proceedings

Going beyond energy efficiency – method for calculating benefits of resource efficiency

Panel: 9. Improving energy efficiency in ICT, appliances and products

This is a peer-reviewed paper.

Authors:
Baijia Huang, Rockwool, Denmark
Larisa Maya-Drysdale, Viegand Maagøe A/S, Denmark
Peter Martin Skov Hansen, Viegand Maagøe A/S, Denmark
Jan Viegand, Viegand Maagøe A/S, Denmark

Abstract

In light of EU’s Circular Economy Package, there is an increasing focus on the potential contribution of energy related products (ErPs) to circular economy targets, by promoting life extension, reuse and recycling, hence reducing greenhouse gases (GHG) emissions and other environmental impacts.

Ecodesign and Energy Labelling regulations traditionally concentrate on reducing energy consumption of ErPs during use. As the energy efficiency of some products has improved and nearly reaching its threshold for further improvement, resource efficiency becomes pivotal in furthering sustainability. This is already observed for notebook computers; when the energy consumption during use phase reduces, the energy needed to produce computers is becoming important.

A review study showed that nowadays manufacturing represents between 56% and 75% of a typical notebooks’ life cycle GHG emissions, this was about 40 to 45% in early 2000s. For printers and multifunctional devices (MFDs), the consumption of consumables during their use is more dominant than their energy consumption in terms of life cycle environmental impacts.

This paper discusses the balance of energy and resource efficiency of products, especially when resources outweighs energy consumption in LCAs, and how EU policies should go beyond energy efficiency by focusing also on reduction of resources. It also proposes a methodology for calculating the benefits of improving resource efficiency of ErP in terms of embedded energy and other environmental impacts. This methodology is developed on the basis of the EcoReport Tool that is widely used by all preparatory studies for Ecodesign and Energy Labelling, but with additional focus on other environmental impacts. A case study is presented to illustrate the calculated benefits of concrete resource efficiency improvements from reusing toner and ink cartridges for printers and MFDs.

Downloads

Download this paper as pdf: 9-130-19_Huang.pdf

Download this presentation as pdf: 9-130-19_Huang_Presentation.pdf