Search eceee proceedings
Novel method determining the degenerating insulation and age-related efficiency loss of domestic cooling appliances
Panel: 9. Improving energy efficiency in ICT, appliances and products
Authors:
Christian Hüppe, University of Bonn - Institute of Agricultural Engineering, Germany
Rainer Stamminger, University of Bonn - Institute of Agricultural Engineering, Germany
Jasmin Geppert, University of Bonn - Institute of Agricultural Engineering, Germany
Abstract
Household cooling appliances form an integral part of our everyday life. Nowadays, refrigerators, freezers or combined cooling appliances are viewed as commonplace household commodities that belong to the standard equipment of most kitchens. In fact, more than 99.7% of all German households owned a refrigeration appliance in early 2019 [German Federal Statistical Office, 2019]. Due to this high degree of market penetration, refrigeration appliance’s share in German national electricity consumption amounted to 5% [German Federal Environmental Agency, 2018]. Despite the omnipresence of refrigeration appliances, there is still a lack of knowledge about their age-related efficiency loss over time. In fact, past studies provide basic evidence for the increasing power consumption of cooling appliances with advancing age, but fail to investigate associated technical wear. The degenerating performance accounts for rising power consumption and increasing running costs over time. As a consequence, a profound understanding of reasons for refrigeration appliance’s degenerating efficiency throughout their lifetime does not exist and has never been investigated before. Our study intends to close this research gap.
In this work, we intend to examine technical components that impact the power consumption of household cooling appliances over time. The age-related efficiency loss is most probably attributed to the wear of three distinct components, namely the compressor refrigerant circuit, door gasket and the thermal insulation of the cooling compartment. The challenge is to identify which component causes which degree of efficiency loss over time. In order to investigate age-related efficiency losses, non-destructive test procedures are inevitable. Therefore, novel measuring concepts relating the degeneration of each component to the increasing electricity consumption of cooling appliances have been developed and applied to a variety of different household cooling appliances. This approach enables us to investigate the decreasing energy efficiency of refrigeration appliances over a long period of time.
This contribution is an extract of our study and focuses on the technical wear of the cooling compartment’s thermal insulation. A novel test procedure was developed to assess the influence of the degenerating insulation on refrigeration appliance’s increasing power consumption over time. Previous studies investigated the age-related degeneration of refrigeration appliance’s insulation based on detached specimens under laboratory conditions. Results thus exist for the stand-alone aging of the thermal insulation material only, disconnected from the operating cooling appliance and not performed under real life conditions.
In contrast to that we examine the degeneration of varying insulation materials intrinsic to cooling appliances. We apply our test procedure to a variety of test devices containing different types of insulation material to assess apparent changes in thermal conductivity. This novel method gives a test value (kI) describing the quality of a testing device’s insulation at the time the test is executed. Afterwards, we connect our test value to the heat transition coefficient (k-value) and conduct standardised energy consumption measurements.
Repetitions of our test procedure at different points in time allow us to draw a connection between domestic cooling appliance’s age-related efficiency loss and their degenerating insulation. The course of efficiency loss of refrigeration appliances related to the degenerating insulation can be examined and anticipated. Our proposed method therefore forms an unprecedented test procedure. Therewith, our approach provides an in-depth investigation of household cooling appliance’s efficiency loss for the first time and grounds the very basis for future improvements in energy efficiency.
Downloads
Download the display as pdf: 9-152-19_Huppe_presentation.pdf
Panels of
1. The dynamics of limiting (energy) consumption
2. What's next in energy policy?
4. Monitoring and evaluation for greater impact
5. Smart and sustainable communities
7. Make buildings policies great again
8. Buildings: technologies and systems beyond energy efficiency
9. Improving energy efficiency in ICT, appliances and products



















