Search eceee proceedings
Comparison of electric vehicle charging efficiency with IEVCC and a typical EVSE
Panel: 6. Energy-efficient and low-carbon mobility for all
This is a peer-reviewed paper.
Authors:
Filipe Cardoso, Portugal
Marco Silva, Coimbra Polytechnic - ISEC and INESC Coimbra, Portugal
José Rosado, Coimbra Polytechnic - ISEC and INESC Coimbra, Portugal
Abstract
More than a fashion trend, EVs (Electric Vehicles) are here to stay and present themselves as a solution for combating climate change. In addition to the TCO (Total Cost Ownership) reductions, these vehicles are much more efficient than their equivalent ICE (Internal Combustion Engine) counterparts. Even if all the energy used to charge an EV comes from renewable sources, one of the points in the energy transfer chain, where efficiency can be optimized is in the charging process, whose efficiency depends on the charging power. This results from the fact that the EV internal charger has a fixed minimum power consumption to operate. Charging with a higher power results in less time charging, so less time is spent wasting energy on the EV internal charger. EVs come equipped with an internal charger whose charging power can be controlled by an external charge controller, commonly known as an EVSE (Electric Vehicle Supply Equipment).
Manufacturers typically supply EVSEs with a fixed charging power setting, so they can be used on a household plug without any safety issues concerns. Usually, this power is set to around 2.3 kW for 230 V, but it is not uncommon to find values around 1.84 kW and very rarely 2.76 kW (which corresponds to currents of 8∼12A). Often these EVSEs, due to the low charging power, do not always allow the users to restore the total charge used on a common day. In addition, the use of energy in a house is conditioned by the contracted power, which, if exceeded, triggers the main switchboard of the house. This requires some scheduling to manage an EV charging session in conjunction with other house appliances usage. The use of an EVSE that considers the instantaneous house consumption and adjusts the EV charging to the maximum available power, allows to maximize the charging efficiency. A new EVSE that implements these functionalities has been developed and is addressed in this work. This EVSE, which is called IEVCC (Intelligent Electric Vehicle Charger Controller) is compared with a fixed EVSE, and the results show greater efficiency in the charging process.
Downloads
Download this presentation as pdf: 6-079-22_Cardoso_pres.pdf
Download this paper as pdf: 6-079-22_Cardoso.pdf
Panels of
1. Dynamics of consumption: less is more?
2. Efficiency and beyond: innovative energy demand policies
3. Policy, finance and governance
4. Monitoring and evaluation for a wise, just and inclusive transition
5. Towards sustainable and resilient communities
6. Energy-efficient and low-carbon mobility for all
7. Policies and programmes for better buildings
8. Innovations in products, systems and building technologies


