Search eceee proceedings

Lowering Building Energy Use by Improving LAN Energy Efficiency

Panel: 8. Innovations in products, systems and building technologies

This is a peer-reviewed paper.

Authors:
Terence Smith, Mississippi Consulting Pty Ltd, Australia
Paul Ryan, Energy Consult Pty Ltd, Australia
Anson Wu, Hansheng UK, United Kingdom

Abstract

Improving ICT wired and wireless Local Area Network (LAN) energy efficiency will lower building energy use, in particular commercial buildings. With a growing reliance on LANs for the use of Internet of Things (IoT) building management applications, the need for networks to be as energy efficient as possible is only going to be greater. The energy savings is estimated using the Total Energy Model (TEM).

The TEM, developed for the International Energy Agency 4E Electronic Device and Network Annex, models Internet network and device energy use. The TEM reveals that LANs, within the commercial and residential sectors, are one of the highest energy consuming components of the Internet. Opportunities to improve LAN efficiency are currently technically feasible in the commercial sector, while further development is required for LANs in the residential sector.

The Energy Efficient Ethernet (EEE) amendment to the Institute of Electrical and Electronic Engineers (IEEE) 802.3 standard was intended to dramatically reduce LAN energy use. And while the potential remains, it appears that relatively few LANs take advantage of this option. The Wi-Fi Power Save (PS) mode enabled connected battery-powered devices to reduce power consumption. However, despite the development of PS mode, there has been little effort to improve the overall energy efficiency of Wi-Fi networks.

LAN energy efficiency could be enhanced by enabling connected Wi-Fi networks to enter a low power mode. One way of achieving this is to amend the relevant LAN standard to enable an Ethernet network to inform a connected Wi-Fi network that it is in Low Power Idle (LPI) mode, thus allowing the Wi-Fi Access Point to enter a similar mode.

Based on the conservative assumptions outlined in the paper regarding implementation of the proposal, the TEM estimates that by 2030 the energy saving in commercial buildings, compared to the BAU case, would be in the order of 34 TWh annually. The paper also explores additional technical options to increase the efficiency of Wi-Fi LANs in the residential sector.

Downloads

Download this presentation as pdf: 8-127-22_Smith_pres.pdf

Download this paper as pdf: 8-127-22_Smith.pdf