Search eceee proceedings

Solar resource-efficiency gain for energy communities based on current solar energy system deployment

Panel: 5. Sustainable communities

This is a peer-reviewed paper.

Authors:
David Lingfors, Dept. of Civil and Industrial Engineering, Div. of Civil Engineering and Built Environment Uppsala University, Sweden
Joakim Munkhammar, Uppsala University, Sweden
Johan Lindahl, Becquerel Sweden AB, Sweden

Abstract

The concept of Energy Communities (EC) has been introduced in the European Union (EU) to promote energy efficiency and clean-energy transition. The EU Member States are therefore currently analysing how to promote ECs in their national context, e.g., incentive programs and juridical frameworks for internal energy sharing and providing external grid services. In Sweden, current and previous incentive programs for solar Photovoltaics (PV) have mainly been directed towards small residential, commercial or public decentralized installations, which is reflected in the high share of small systems in the Swedish PV portfolio.

This study investigates the gap between the property-optimised and EC-optimised deployment of PV systems. Hence, by studying the current (property-optimised) distribution of PV, it is possible to evaluate to what extent this distribution is resource-efficient, i.e., quantify the gap to an EC-optimised distribution, where the best roofs for solar energy are utilized, in line with the goals of ECs. In a previous project, a method was developed that identifies existing Solar Energy Systems (SES), both PV and Solar Thermal, in aerial images using AI, with high precision (>95 % identified). Also, their orientation (tilt and azimuth) and impact from shading were determined based on Light Detection and Ranging data. The methodology has so far been applied to several Swedish municipalities. In this study, 20 “neighborhoods” in the Falun municipality, Sweden, defined as all customers/buildings connected to the same substation, were analysed, under the assumption to constitute hypothetical ECs. Simulated power output from actual identified PV systems, within each of these ECs, were compared to the output of PV modules hypothetically assumed to have been deployed on the “best” roof locations instead, or if “Large” roofs of high solar irradiation and low shading would have been prioritised.

The voltage rises in one of the ECs were analysed through power flow analysis for these three scenarios, under the two conditions; (1) that the installed capacity of each system is fed into the grid and (2) that the actual peak power output is fed into the grid, resulting in lower voltage rises than in the first case and thereby allowing a higher PV penetration before the voltage limits are violated. The results show that shading decreased the annual yield by 12, 4 and 3 % the “Actual”, “Large” and “Best” scenarios, respectively, compared to modelling without shading. The peak output is however not affected by shading.

Finally, the study gives rise to some policy recommendations as a virtual EC for customers connected to the same substation is shown to be more resource-efficient in comparison to creating a parallel grid within the EC, which is currently allowed in the Swedish legislation. In addition, the substation boundary would probably simplify the dialogue between the distribution system operator and the EC, when optimising the local energy system, preferably to better match PV power generation and demand, i.e., increasing the electricity self-sufficiency, as this will benefit both parties.

Downloads

Download this paper as pdf: 5-065-24_Lingfors.pdf

Download this presentation as pdf: 5-065-24_Lingfors_pres.pdf