Search eceee proceedings
The potential of waste water heat recovery systems in reducing the energy need for water heating in the EU in a cost-efficient way
Panel: 8. Products, systems and technologies to decarbonise buildings
This is a peer-reviewed paper.
Authors:
Pavel Sevela, Austria
Pavel Sevela, University of Innsbruck, Austria
Johannes Frenger, University of Innsbruck, Austria
Jürgen Schnieders, Passive House Institute, Germany
Rainer Pfluger, University of Innsbruck, Austria
Abstract
After extensive research, Waste-Water Heat-Recovery (WWHR) technology was identified as the most promising technology to unlock the under-addressed potential in reducing the energy need for domestic hot water heating.
Particularly interesting application of WWHR is for showering, which accounts for about 70 to 82 % of the daily residential hot water tapping profile. Shower-wise installed heat-exchangers offer a cost-effective way of utilizing otherwise wasted heat for preheating cold fresh water, thus reducing the temperature span covered by the water heater. The savings on delivered energy for water heating can be up to 40 %. The unique advantage of WWHR, is achieving high thermal energy savings without compromising on user comfort with low material and monetary needs. The cost-effectiveness of WWHR is best in climates with cold ground temperatures and in cases where showers are used extensively.
At European level, the WWHR itself is theoretically capable of surpassing the energy savings targets planned in the "Fit for 55" climate action in the hot water sector, if all buildings are equipped accordingly. If between 2022 and 2030, every second anyways renovated or newly constructed building in Europe were equipped with the WWHR system, 35.7 TWh less energy would have to be generated and 6.6 Megatons of CO2e emissions less emitted.
Downloads
Download this paper as pdf: 8-094-24_Sevela.pdf
Download this display as pdf: 8-094-24_Sevela_display.pdf














