Search eceee proceedings
Circular economy in hard metals production: energy and environmental impact of recycling processes
Panel: 9. Energy efficiency and sustainability of industry
This is a peer-reviewed paper.
Authors:
Anna Realini, OMCD Group, Italy
Gian Pietro De Gaudenzi, FILMS S.p.A., Italy
Mattia Garabelli, FILMS S.p.A., Italy
Gian Carlo Marcheselli, FILMS S.p.A., Italy
Gian Maria Passoni, Uffici.A, Italy
Abstract
Hard metals are a class of composite materials where a carbide-base skeleton, mainly tungsten carbide (WC), is embedded in a metallic binder, usually Co-based, being Ni a viable alternative for special applications.
The special characteristics of tungsten carbide alloys (hardness and wear resistance) allow them to be used in a wide range of sectors where previously inferior materials were used, allowing users to better manage industrial processes and increase production performance.
They are also considered a strategic material at the base of industrial economy and societal welfare: geopolitical factors and the EU classification of WC and Co among the Critical Raw Materials, have highlighted the relevance to develop and/or optimize recovering processes of the raw material values along the whole hard metal life cycle.
A model was implemented to maximize the use of secondary raw materials in hard metal production process. The model includes five main sources of secondary raw materials:
(a) the powders recovered along the industrial powder metallurgy production process;
(b) the hard metal scrap collected at the end of the life cycle (urban mining) and selected in order to be processed by an oxidation/reduction/carburization thermal treatment;
(c) the hard metal scrap and sludges, “urban mined” and treated by a third party chemical recovery process, comprising (d) toxic oil sludges regenerated by a thermal process;
(e) the hard metal scrap treated by a third party Zn-based recovery process.
The aim of this paper is to quantify the energy saving potential and environmental impact of hard metal recycling through oxidation/reduction/carburization process (sources a) and b)), instead of chemical routes (sources c), d) and e)), compared with literature data that consider the impact of hard metal production from metallic ores.
The main results are the higher environmental impact of the pyrometallurgical process, in the case of recycling, but this is compensated by the lowest impact with regards to the whole process.
Errata
The header of Table 3 has been changed, and some figures in Table 4 and Table 6 have been corrected together with the adjoining text. (2024-07-01)
Downloads
Download this presentation as pdf: 9-198-24_Realini_Pres.pdf
Download this paper as pdf: 9-198-24_Realini_rev.pdf














